1.5ATA Portable Monoplace Hyperbaric Chamber

                                                                                          Portable Hyperbaric Chamber
                                                                                                    NBYY-BXDR-001



Product Information:
Chamber Working pressure 50kpa/ 1.5ATA /7.5psi
Burst pressure 25.8psi/177kpa
Size 2100*750mm
Main machine Voltage 220V
Rated power 450W
Size L:600mm W:500mm H:1200mm
Packing Weight 46 KGS
Size 600*650*1000mm


Advantages

1. The burst pressure of the chamber is more than three times of the working pressure. That ensures the safety of the hyperbaric chamber during using.
2. The weight of the chamber is only 15KGS which is convenicent for carry.
3. The main engine and the cabin are linked by one tube, which is easy to use and has no redundant and complicated tubes.
4. The main engine includes compressor and oxgyen generator. There are wheels under the main engine, easy to push and carry.

Why choose PVC instead of TPU?
1. Our PVC material has RoHS and ISO 10993 certificates. This material is harmless to human beings.
2. The flame retardant performance of TPU material is not good. When the oxygen concentraiton in the chamber is high, the flame retardant is very important.
3. Due to its degradability, TPU materials have poor anti-aging properties.Therefore, the service life of this material is relatively short.
4. The most important thing is that TPU material can't stand high pressure so the working pressure of TPU product is relatively low.

What is hyperbaric oxygen therapy (HBOT) ?
Hyperbaric oxygen therapy is a process in which the user inhales oxygen in an environment higher than one atmospheric pressure

The medical working pressure is above 2.0ATA .The woring pressure of YANGYU hyperbaric chamber is 1.5ATA which is close to the medical pressure and therefore it can have good effect.



Pictures of the product