20020 Revolcing Caulking gun

A caulking gun is used in the application of caulk. Most caulking guns are shells that hold a caulk tube and allow pressure to be controlled by the user through a trigger-like handle.

The caulking gun was invented by Canadian Theodore Witte. Mr. Witte is described as the sort of individual who looked for inspiration where ever he could. It was in 1894 that he put a ratcheted piston to use squeezing out window putty for a clean, smooth seal. His caulking gun is very similar to a cake decorator’s gun, showing that he might have gotten his inspiration from the kitchen. Mr. Witte’s invention didn’t initially get a warm welcome, despite its functionality.

As caulking guns became more popular, so did the availability of caulking tubes.  In fact, you can even get reusable caulking tubes for pushing out cured epoxy.  Some have even taken the idea of the caulking gun and moved it into the tube.  Pressurizing the tube allows the caulk to be pushed out using a similar procedure as the caulking gun.

When it comes time to actually use a caulking gun here are some tips to remember. First, always read and follow the instructions on the compound cartridge as there can be differences between compounds. The best adhesions are on clean, dry surfaces. They should be free of any paint and old caulk. A putty knife works great to scrape off old caulk and paint. Hold the gun at a forty-five-degree angle. The best way to make sure that you’ve got the right angle is to see the caulk being forced into the crack as it comes out of the tube. Try to caulk in one even line without stopping. Push the caulk to the bottom to avoid bubbles. Apply to both sides of a crack for better protection. Sometimes caulk will shrink if it does reapply.