Technical Specification and Parameters of 200KW DCEC Diesel Genset |
|||
Genset Technical Parameters : |
|||
Genset Model |
JKDG-200GF |
Steady-state Voltage Regulation Rate |
≤±0.5% |
Rated Power |
200KW |
Transient Voltage Regulation Rate |
≤±15% |
Rated Power Factor |
COSΦ=0.8 (lag) |
Voltage Fluctuation Rate |
≤±0.5% |
Rated Output Voltage |
400V/230V |
Voltage Waveform Distortion |
≤5% |
Rated Current |
360A |
Electricity Pressure Stabilization Time |
≤1.5s |
Rated Frequency/Speed |
50Hz/1500r |
Steady-state Frequency Adjustment Rate |
≤±2% |
Start-up Control Mode |
Electric Start |
Transient Frequency Adjustment Rate |
≤±5% |
Full-load Fuel Consumption |
207g/kw/h |
Frequency Stabilization Time |
≤ 3s |
Fuel Brand |
0 # light diesel |
Frequency Fluctuation Rate (%) |
≤±0.5% |
Lubricant Brand |
(Standard) SAE 15W/40 |
Noise (LP1m) |
100dB (A) |
Profile Size (mm) |
2600*970*1500 |
Weight |
2000KG |
Diesel Engine Technical Parameters: |
|||
Brand |
DCEC |
Cooling Mode |
Closed Water Circulation |
Engine Model |
6LTAA8.9-G2 |
Type |
Four Strokes, Exhaust Gas Turbocharger, Direct Injection Compression Ignition |
Power |
240KW |
Lubricant Capacity |
28L |
Cylinder Number |
4/In-line |
Speed Regulation Mode |
Electronic Speed Regulation |
Exhaust Volume |
8.9L |
Cylinder Diameter* Travel |
114mm*145mm |
Start Mode |
DC24V Electric Starting |
Speed |
1500rpm |
Alternator Technical Parameters: |
|||
Brand |
Stamford (Customized) |
Protection Level |
IP22 |
Model |
P11441 |
Connection Mode |
Three-phase, Four-wire, Y Connection |
Rated Power |
200KW |
Regulation Mode |
AVR (Automatic Voltage Regulator) |
Rated Voltage |
400V/230V |
Output Frequency |
50Hz |
Insulation Level |
H Class |
Excitation Mode |
Brushless Self-Excitation Magnetism |