54Mbps ADSL Modem Wifi Router Modem with RJ45 Port Thomson TG585 V7
54Mbps ADSL Modem Wifi Router Modem with RJ45 Port Thomson TG585 V7
Description
This is a well-designed high-speed and high performance adsl2+ router, which provides 4-port switch function and supports kinds of network protocols, steady runs, and is compatible with various DSLAM, which is preferred by the individual users, the SOHO, and the small enterprise to access the internet.
Features
1. Full speed, auto-sense ADSL 2+ routing, bridging
2. 32M/64M Flash & Memory
3. Inbuilt 3 antennas to boost signal
4. Up to 24mbps downstream and up to 1024kbps upstream data rate
5 . Maximum transmission range:6.5 kilometers
6. Friendly GUI for web configuration
7. Compatible with virtually all standard internet applications
8. Support for up to 8 permanent virtual circuits (PVC)
9. NAT, IP filtering and password authentication to modem
10. Support remote management
11. Support build-in PPPOE
Specification
ADSL specification | |||
Line Coding | Discrete Multi-Tone (DMT) | ||
Standard Compliant | Full rate ADSL ANSI T1.413 Issue 2 | ||
ITU G.992.1 (G.dmt) Splitter less G.992.2 | |||
ITU G.994.1 G.996.1 ITU 992.5(ADSL 2+) | |||
Data Rate | Maximum transmission rate: Downstream up to 25 Mbps, and | ||
Upstream up to 1024 kbps | |||
ATM specification | |||
ATM Adaptation Layer | Support AAL5 | ||
VCs | Support 8 Permanent Virtual Circuits (PVCs) | ||
Service Class | UBR, CBR, rt-VBR, nrt-VBR | ||
OAM | ITU-T I.610 OAM Principles & Functions (include F4/F5) | ||
Basic Protocol | |||
RFC 2684 | Multiple protocol encapsulation over AAL5: | ||
Support Logical Link Control (LLC) encapsulation | |||
Support VC-based multiplexing | |||
Support Bridged and Routing | |||
RFC 2364 | PPP over AAL5: | ||
Support LLC encapsulation | |||
Support VC-based multiplexing | |||
RFC2516 | Support PPP over Ethernet Relay | ||
Support PPP over Ethernet | |||
RFC 1577 | Classical IP over ATM | ||
Bridged Function | |||
IEEE802.1d | Transparent, learning bridge with spanning tree support. | ||
| PPPoE relay | ||
Routing Function |
| ||
| IPv4, TCP, UDP, ICMP, ARP, RARP, proxy-ARP | ||
Routing | Routing Information Protocol (RIP, RIPv2) | ||
| Static Routing | ||
DHCP | DHCP Server/Client/Relay | ||
DNS | DNS relay | ||
IGMP | IGMP v1, v2 Proxy | ||
Security |
| ||
IP sharing | Network Address Translator (NAT) | ||
Authentication | PPP with PAP/CHAP | ||
IP Filter | Raw/IP Filtering | ||
| SPI | ||
VPN Pass Through | VPN: L2TP Client/Server & L2TP/PPTP Pass Through | ||
| VPN: IPSec Pass Through | ||
Deny of Service | DoS (UDP, TCP) | ||
| ID/Password Authentication | ||
Management |
| ||
Management | Configuration through menu driven console via RS232 | ||
| Configuration through Web interface | ||
| Configuration through Telnet connection | ||
| SNMPv1 and MIB II( RFC1213 ) | ||
| Implement Log & Trace function | ||
Remote Management | PVC&ECO | ||
F/W Upgrade | TFTP, FTP and HTTP for firmware download | ||
Led Indication | On | Off | Flashing |
Power | Power On | Power down | N/A |
PC (LAN TX/RX) | LAN enable | LAN disable | Data transmission |
Status (WAN link) | ADSL line up | ADSL line disconnect | Handshaking |
Line (WAN TX/RX) | N/A | No data transmission | Data transmission |
SYS | Defects | OK | Self-Diagnoses |
Button |
| ||
Reset | One Button for reset and default | ||
Power Switch | One Switch for power on/off | ||
Interface Port |
| ||
LAN | 4 RJ-45 port for 10/100 Ethernet connection | ||
WAN | 1 RJ-11 port ADSL line | ||
Serial(Inner) | 1 craft port for console management | ||
USB(optional) | 1 USB-B port for USB1.1 connection | ||
Power Supply | |||
Input Voltage | AC 220V/50HZ | ||
Power Consumption | 15VAC, 700mA | ||
Operating Environment | |||
Operating Temperature | 32F to 104F (0 C to 40 C) | ||
Non-Operating Temperature | -4F to 149F (-20 C to 65 C) | ||
Humidity | 5% to 95% (non-condensing) | ||
Gallery of Thomson V7 ADSL Modem
Company Profile
Our service:
---Your inquiry will be replied in 24hours
---Well-trained and experienced staffs to answer all your inquires in fluent English
---OEM&ODM, for any of your customized products we can help you to design and put into product
---Monthly output over 6,000,000 pcs
---All our products with 12months guarantee
About sample:
---Sample is available.
---Sample lead time: 2-3 working days, 4-5 days with customized logo
---More details, please contact with us.
Payment methods:
---T/T, Western Union, LC.
---30% deposit, balanced before shipment.
Shipping & Trade terms:
---By sea, air, or UPS, FEDEX, EMS, DHL, etc.
---Payment:T/T, Western Union, LC.
---Delivered time: 2-3 business days for sample, 20-25 days for mass order.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier