1).The walking transmission box
A.Open the positioner clutch cover and pour clean lubrication oil into the box.
B.Check the Height of the oil surface.It should reach the middle of the oil box.
C.Check the oil box every day during the operation period.
D.Change the lubricating oil before every seasonal operation.
![8 Row Rice Transplanter / Rice Paddy Transplanting from China supplier](/public/media/LazyImage_placeholder.09bec84d.svg)
How to adjust 8 row rice transplanter?
Adjustment of the transplanter must be done when the engine have stopped
(1).The appropriate tightness of the V-belt can be tested by pressing down the center of the belt and the distance is 1-2cm.
The tightness of the belt can be adjusted by changing the relative distance of the engine on the rack.
(2).The adjustment of the friction clutch.
Method of adjustment. Remove the V-belt hood,open the clutch pulley and cover. Loosen the bolt(M16X1 .5)and remove clutch pulley. Reduce(when power cannot be transmitted)or increase(when power cannot be cut off) the number of adjusting shims until the clutch works dependably.Then reinstall the pulley and the V-belt hood.
(3).Adjustment of side clearance of the separating needle with the seeding gate
This side clearance should be 1.25mm on both sides. If it is less on either side, adjustment should be made. During transplanting operation,this side clearance should be checked twice every day.