Item: | AM-LR-001 | ||||
Name: | ATV LOADING RAMP | ||||
Size: | 89X12" | ||||
Certification: | CE |
1.Our ATV Ramp could fold easily to less than 4 feet long and are about 1 foot wide.
2.Our ATV Ramp have a flat security plate on the bottom.You have no trouble with sliding,but care is necessary.
3.Good design hinge allow ATV Ramp to fold in half for easy carry and compact storage.
4.Our ATV Ramp are made of high-grade aluminum which could make it strong and not rust at all.
5.Our ATV Ramp have a rubber coated finger on the top side to provide extra grip and will not scratch the trailer surface.
6.Serrated rungs allows for great traction.
Ramps are intended for specific applications and it is imperative the ramp that you have purchased is not used for any other application than its intention. Please carefully read and comply with the instructions on how to use quality loading ramps
Instructions are as follows:
1.) The bolt must be inserted and hand-tightened through the barrel hinge.
2.) Park vehicle or trailer on flat, firm ground.
3.) Place ramps on the tailgate or trailer to accommodate the wheelbase of the loading vehicle.
4.) Insure the plate or fingers of the ramp are securely in place.
5.) Install and secure safety straps. An illustration of how to secure the safety straps is as follows:
6.) Slowly ride machine up the ramps making sure tires are centered on the ramp at all times.
7.) Acceleration must be slow, controlled and constant. The operator must remain in control of machinery at all times during loading and unloading.
8.) Use the brake as necessary to control your speed while unloading. Sudden or erratic braking or accelerating will cause ramps to pull away from the tailgate or trailer.
WARNING - NEVER EXCEED THE MAXIMUM LOAD CAPACITY OF THE RAMPS. USE AT YOUR OWN RISK.
one set one carton
Carton size:120.5*39.5*30cm
Gross Weight: 16kgs/carton