Anti Chemical Safety Goggles Anti-Scratch Safety Glasses Louver Goggles

Following the EN 166:2001 European harmonised standard requirements present in clause 10, Eye protector model BTG-900 has provide the information with each eye-protector that is according to the general product information and protective performance requirements.

【Product】DISPOSABLE GOGGLES
【Certificate】GB14866-2006  & EN166: 2001
【Manufacturers】Taizhou Shubeikang Medical Technology Co. LTD
【Add】200meters east of oulusha Co., ltd., Yunhu Village, Hengjie Town, Luqiao District, Taizhou City, Zhejiang
【Tel】+86-576-89231666
【After-sales Service】Taizhou Shubeikang Medical Technology Co. LTD                                    
【Menu Preparation Date】18-May-2020
【Model No.】BTG-900
【Date of manufacture】18 May 2020
【Valid until】 May 17, 2025            

Use. Technical instructions:
Range of use for medical institutions to check the treatment of the protective role, block body fluid, blood splash or splash to the eye.
【Method】
Tear the bag along the open seal, remove the isolated eye mask, wear the isolated eye mask, adjust the degree of fit of the isolated eye mask and the head and head band tight.

【Product Introduction】
Usually composed of mirror frame, lens, headband, frame, lens is made of polymer material, headband is composed of elastic soft cloth or elastomer.
Resistance to fogging.

【Product Performance】
1.The surface of the isolated eye mask should be clean, free of stains and dirt; Away; isolated eye mask should be smooth, burr-free, scratch- and isolation eye mask color should be transparent, wearing should be clearly visible in sight.
2. After the shield is worn, it should completely cover the wearer's eyes.
3. The elastic belt should be elastic; the elastic belt extension rate should not be less than 50%.
4. The break strength at the connection between the fixing device and the housing is not less than 10N.
5. The isolation of the eye mask split should be secure at the junction. Horizontal surface subject to 7N gravity pull, vertical Pull to 3N gravity for a continuous 15S and should not fall off. 【Taboos】
1. Please pay attention to the date and expiration date of the product before use of this product, and it is strictly prohibited to use the product over time.
2. If the packaging is damaged, it is strictly prohibited.
3. This product is only for single-use use, strictly prohibited to use more than one person together, after use destruction.
4. This product is strictly prohibited at high temperature, strong corrosive gas in the air, strong radioactivity or other extremes use in the environment.
5. This product is only used as a medical activity to prevent splash pollution operators, strictly prohibited to make Replace closed protective equipment with this product.

【Storage conditions】
Stored in a non-corrosive gas, dry, well ventilated environment with a relative humidity of no more than 80%.


【Limited Term】
This product is a one-time medical device, valid for five years.

【Warning】
1. Materials which may come into contact with the wearer's skin could cause allergic reactions to susceptible individuals.
2. Scratched or damaged oculars should be replaced.
3. Eye-protectors against high speed particles worn over standard ophthalmic spectacles may transmit impacts, thus creating a hazard to the wearer. 【Note】
If protection against high speed particles at extremes of temperature is required then the selected eye-protector should be marked with the letter T immediately after the impact letter, i.e. FT, BT or AT. If the impact letter is not followed by the letter T then the eye protector shall only be used against high speed particles at room temperature.

【The significance of the marking on the frame and the ocular】
BL 1 B N —EN166 B 3

“SBK” ——Symbol for Identification of the manufacturer
“1” ——Symbol for Optical class
“B” ——Symbol for middle energy impact
“EN166” ——Symbol for the number of this standard
“B” ——Symbol for middle energy impact
“3” ——Symbol for liquids