Automatic PP Plate Chamber Press Filter

Brife introduction of the automatic PP Plate Chamber Press Filter

This type of chamber filter press machine consist of frame,filter plate ,hydraulic pressing system ,eletctic control cabinet and PLC control system.

Working principle of the automatic PP Plate Chamber Press Filter

With the help of the feeding pump,the solid and liquid are separated by the filter medium(fiilter cloth).Solid particles are remainned in filter chambers forming into cakes ,while liquid is discharged out of the machine through press cake and filter cloth.Then the automatic pulling plate device will open the filter plate one by one and discharge the filter cake.After that,the next pressing process can start.

This automatic discharge filter press is the recessed chamber one with center feeding. It consists of beam,

filter plate, filter cloths, hydraulic unit and electric control cabinet.

1. Beam, High quality carbon steel Q345B and processed with sand blasting to remove rust and oxide skin,

then painted by epoxy primer to get higher intensity and corrosion resistance.

2. Filter plate, Polypropylene(PP) with acid & alkali resistance, anticorrosion, innocuity, tasteless, light weight and high strength.

3. Filter cloths, High quality polypropylene acid and alkali proof or high quality polyester acid.

4. Hydraulic unit, China brand famous pumps and hydraulic valve; Carbon steel bending welding, sealing,

air filtration external oil pump, cooling effect is good, maintenance is convenient; High and low pressure

oil pipe for gb soft connection

5. Electric control cabinet, PLC control cabinet with Siemens brand or schneider brand Electrical

components, Split type or can be fixed on the beam.

Operation process includes the following,

1. The hydraulic unit drive the head plate to press the middle plates and filter cloth between head plate

and tail plate. And chambers form between every two plates.

2. The pump will deliver the mud into the chambers. Solids retainled in the chamber to be cake, and

liquid flow out. Until the cakes is full. Then pump stops.

3. With about 10 minutes pressure holding. When you see there is no liquid flow it, the squeezing

process finishs.

4. The plate shifter device will help to pull the plates one by one, and cake will discharge automatically.

Our Service:

Brief Introduction of Toper:

1. Manufacture experience,

Since 1997, we have done a lot of innovation and improvement in the field of filter and separation

equipment. We are specialized in design of the filter press according to clients’ requirments, the

delivery time of a filter press can be 7 days(if no stock).

2. Technology capacity,

We join and make the standard of filter press industry in China, All of our products have CE certificate,

also they will be tested before delivery.

3. Our superiority,

We are in the first class in the field of filter press of China, more than 250,000 m2 land area and continue

developing. Filter areas of filter press widely ranges from 1 m2 to 500 m2, you can always choose a right

type.

4. Best after-sales,

Supply professional operation training, Timely trouble shooting in 24 hours, we will try our best to solve

your problems on the basis of no influence of your equipment working.