Before installing the faucet, you should pay attention to close the total sluice. Otherwise, the water spray is sprinkled and the water spray will affect the installation and use. Considering it in advance, after the main gate is closed, the original wrench is unloaded in the direction of the counterclockwise direction. Pay attention to cautiously to avoid damage to the water pipe. After using the old faucet for a long time, there will be some mud in the water pipe. Sand impurities, etc., don't worry about installing the faucet of New Moen, but to remove the impurities in the water pipe first. It can be cleaned with a softer brush to eliminate dirt, which can reduce the chance of the faucet in the future and ensure the water output of the water pipe. After the cleaning is completed, you can use the raw material belt to wrap a few circles on the thread of the faucet. Remember to follow the clockwise direction. This can effectively help reduce the possibility of leakage. When installing the faucet of Mo En, you must first have a basic consideration and conduct according to the operation instructions. The faucet installation should also be tightened with the water pipe in the direction of clockwise. What needs to be considered throughout the installation process is to prevent water leakage. It is recommended that you do not twist too hard. After the installation is successful, open the total water valve to try to see if it can be used stably. After the installation of the faucet, the subsequent inspection must be done well, and everyone must do a good job of leakage inspection. Of course, when using the faucet for a long time, you should also pay attention to maintenance. Do not use force switching, which will affect the effect of the faucet, and it also has a certain impact on its life. Do a good job of comprehensive consideration, support the long -term use of faucet, good safety, and guarantee.