Best quality structural Sealant two component Silicone warranty up to 30 years for curtain wall

two-component, high strength neutral curing silicone sealant designed and tested for structurally glazed curtain wall applications. Uncured, both the A and B components are thixotropic pastes and, when mixed, cure quickly to an extremely tough elastomeric silicone rubber and sealant at room temperature with primer less adhesion to many substrates ensuring a durable, flexible, watertight bond.

.CHARACTERISTICS

High strength

Odorless, non-corrosive cure system

Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes

Remains flexible over a temperature range of -58°F(-50°C) to 302°F (150°C)

Successfully tested for use in protective glazing applications

Excellent unprimed adhesion to wide range of substrates including coated, enameled and reflective glasses, anodized and polyester coated or painted aluminum profiles

Good compatibility with other neutral silicone sealants

Meets global standards for structural glazing (American, China, Europe)

APPLICATIONS

Silicone structural glazing in curtain wall; such as factory glazing of unitized curtain wall systems or in field constructed stick curtain wall systems.

Structural attachment of many panel systems.

Protective glazing applications.

Panel stiffener applications.

APPLICABLE STANDARDS

Silicone Structural Sealant meets or exceeds the requirements of the following specifications for two-part sealants.

ASTM Specifications:

C1184, Type M, Use G and O

European Standards

ETAG 002

EN-1279

China Standard:

GB16776

Shelf Life: 12 months from the manufacture date stored in cool & dry place below 27 °C.

PACKAGING

FF-9228 Silicone Structural Sealant is available  consisting of two drums.

Part A: 180L  white

Part B: 19L   black

Mix Ratio by Volume:

A:B = 9:1 to 11:1

TOOLS AND PRIMER

TECHNICAL SERVICE

Caking test    Compatibility test    Contamination test    Interface design

SAFETY INSTRUCTIONS

The company's products are not toxic after curing, but before curing should avoid contact with eyes, if contact with eyes, please rinse with plenty of water, and see a doctor for treatment;Uncured products should be kept away from children. Chemicals will be released during the curing process. Ventilation should be paid attention to during construction and in the curing area to avoid the adverse effects of too high concentration of chemical substances on people

MAINTENANCE

In general, there is no need for maintenance. If the sealant joint is broken and the damaged part is replaced, only the accumulated dirt can be removed with solvent, and then the sealant is used to fill. The silicone sealant of our company can stick to the cured silicone sealant very well

ENSURE

After the customer purchases the product and determines the construction company and the process, the company issues the quality guarantee of the sealant product to ensure that it will be issued in different ways according to the needs and standards