1.
2. Adopts changing spacers to make multi sizes profiles sections.
3. Inline flexible punching system integrated
4. Pre-cutting and Post cutting is optional:
If need to produce many sizes, we can adopt pre-cutting to save cost and much time on changing blades during change sizes.
If profile sizes are not so many, post cutting can improve profile quality greatly.
5.
6.
7.
Suitable material: Cold/hot Rolled Steel, Galvanized Steel
Thickness: 2.0-3.0(mm)
Yield Strength: 230-300 (MPa)
Width: as profile requests
1. Decoiler: 3t/5t Motor/hydraulic motor/passive (optional)
2. Feeding table
3. Leveling device
4. Holes punching device as profile requests
5. Roll forming system: 12
6. Safety cover: optional
7. Post cutting device
8. Output System: Manual supporter/ Automatic Stacker (optional)
Stackemaster: (Output direction) Lateral/Longitudinal (optional)
9. Hydraulic system: Power supply for holes punching /post-cutting system
10. Electric control system: MITSUBISH/SIEMENSE/AMS (optional or as requested )
Machine Condition Fully New, A Grade quality
Panel Shape As profile drawing and customer's requirements
Operator needed 1-2 persons
Power Supply 220V/380V/415V/460V, 50/60Hz, 3P (as requests)
Equipment Weight about 12t
Dimension (L*W*H) about 25*3*
LOADING SIZE Normally need 1x 40' (+ 1x20GP)container.
Equipment Color Normally Blue/White, or as requests;
Place of
Packing Standard and careful export packing