Canine Brucella (C.Brucella Ab) rapid test kit

1.  Intended Use

Rohi Canine Brucella Ab  Test is designed for the qualitative detection of Canine Brucella Ab Test  in animal’s feces or serum according to sandwich lateral flow immunochromatographic principle.

   2.    PRINCIPLES

Rohi Canine Brucella Ab Test is a sandwich lateral flow immunochromatographic assay. There is a testing window on the test device which contains invisible T (test) zone and C (control) zone. When sample is applied into the sample hole on the device, the liquid will laterally flow on the surface of the test strip. If there is enough Toxoplasma gondii antigen in the sample, a visible T band will appear. The C band should always appear after a sample is applied, indicating a valid result. By this means, the device can accurately indicate the presence of Toxoplasma gondii antigen in the sample.

For Cassette

1.Review “Specimen collection” instructions. Test device, patient’s samples, and controls should be brought to room temperature (20-30℃) prior to testing. Do not open pouches until ready to perform the assay.

2.Remove the test device from its protective pouch (bring the device to room temperature before opening the pouch to avoid condensation of moisture on the membrane). Label the device with patient or control number.

3.Hold the dropper vertically and transfer 3 full drops of urine (approx. 0.15ml) to the specimen well (S) of the test device, and then start the timer. Use a separate pipette and device for each sample or control.

4.Read result between 3 to 8 minutes after the addition of samples. Do not read result after 8 minutes.

How To Read ?

Positive: Only one pink band appears on test region of the Cassette.

Negative: Two pink bands appear on test region of the Cassette.

Invalid: If without colored band appears on test region, this is an indication of a possible error in performing the test. The test should be repeated using a new device.