Clamping Electromagnetic Flow Meter-PMF-J

Clamping electromagnetic flowmeter-PMF-J

Product Overview

Clamped electromagnetic flowmeter is also designed and manufactured according to Faraday's law of electromagnetic induction, and its composition and function are the same as those of flange electromagnetic flowmeter. The difference is that the sensor is designed with compact structure and light weight. The shell is made of all stainless steel, and the short measuring tube is beneficial to clean the dirt on the tube wall, and it is convenient to install and clean.

Overall dimensions of incorporate-type clamping electromagnetic flowmeter

Note:

(1) "√" in the above table indicates the optional lining of each caliber flowmeter

(2) When the working pressure of the tested pipeline is higher than the nominal pressure of the sensor, please consult our company before ordering.

(3) Please consult our company in advance when ordering the clamping connecting flange with other flange standard sensor sizes (ANSI American standard and JIS Japanese standard).

Related dimensions of split-type clamping electromagnetic flow sensor

Note:

(1) "√" in the above table indicates the optional lining of each caliber flowmeter

(2) When the working pressure of the tested pipeline is higher than the nominal pressure of the sensor, please consult our company before ordering.

(3) Please consult our company in advance when ordering the clamping connecting flange with other flange standard sensor sizes (ANSI American standard and JIS Japanese standard).

ordering instructions

1. optional pressure grade of sensor is 0.6mpa.1.0mpa.1.6mpa.2.5mpa. 。

2. The converter model shall be selected according to the site working conditions and user requirements.

3. Please select the caliber from the caliber selection table. The medium velocity should be considered when selecting the caliber table. The recommended velocity range is 1m/s ~ 5m/s.

4. The electrode materials should be selected according to the corrosivity of medium and the characteristics of electrode materials.

5. The lining shall be selected according to the actual working conditions on site, and the temperature of the medium shall not exceed the temperature-resistant range of the lining.

6. The protection level should be selected according to the actual working conditions on site.

7. Additional converter function options are selected according to the actual requirements of users. Different models of converters have different functions.

8. If there is negative pressure, choose F46 or PFA lining with steel mesh. Please pay attention to the diameter range of steel mesh.

9. If grounding ring is needed, please consult the manufacturer when ordering; If grounding electrode is needed, please consult the manufacturer when ordering.

10. if some parameters of electromagnetic flowmeter are not listed in this selection table, it needs to be customized, and the customized model shall be determined separately