Colorful Red Powder Surface Aluminum Extrusion Profiles 6063 T5 Alloy for Middle East Market

Characteristics of Aluminum Profile:

-Corrosion Resistance
The density of aluminum profile is only 2.7g/cm3, which is about 1/3 of that of steel, copper or brass (7.83g/ cm3, 8.93g/ cm3, respectively). In most environmental conditions, including in air, water (or salt water), petrochemistry and many chemical systems, aluminum can show excellent corrosion resistance.
-Conductivity
Aluminum profile is often selected for its excellent conductivity. On the basis of equal weight, the conductivity of aluminum is nearly twice that of copper.
-Thermal conductivity
The thermal conductivity of aluminum alloy is about 50-60% of copper, which is beneficial to the manufacture of heat exchanger, evaporator, heating appliance, cooking utensil, cylinder head and radiator of automobile.
two
-Nonferromagnetism
Aluminum profile is non ferromagnetic, which is an important feature for the electrical and electronic industries. Aluminum profiles cannot be self ignition, which is important for the application of handling or contacting inflammable and explosive materials.
-Machinability
The machinability of aluminum profile is excellent. In various deformation and casting aluminum alloys, and in the various states after the production of these alloys, the machining characteristics have changed greatly, which requires special machine tools or technologies.
-Formability
The allowable deformation is controlled by specific tensile strength, yield strength, ductility and corresponding processing hardening rate.
-Recyclability
Aluminum has high recovery, and the characteristics of recycled aluminum are almost the same as that of primary aluminum.

Product Details:

Introduction of Powder Coating:

For aluminum profiles, it is necessary to carry out surface spraying. There are three main spraying methods:

1. Fluorocarbon spraying of Ω rotating disc for aluminum profile: firstly, the workpiece mode is put on the production line, and then the preliminary treatment is carried out, until the Ω rotary disc is used for automatic electrostatic spraying primer, and then the primer is leveled, and then the Ω rotary disc is used for automatic electrostatic spraying of the top coat, and then the finishing coat is applied to the automatic electrostatic spraying finishing paint, and then the leveling cover is applied Finish, then dry and cool naturally until the workpiece is removed from the production line.

2. Vertical electrostatic spraying of aluminum profile matrix: firstly, the workpiece is placed on the production line for preliminary treatment, and then the primer is sprayed with Ω rotary disc, and then the primer is leveled. Then, the top coat is sprayed by electrostatic spray gun automatically, and then the plane paint is flowed. Then, the finishing paint is sprayed automatically by the electrostatic spray gun, and then the finishing paint is dried and natural after the finishing paint is leveled Cool down until the workpiece is removed from the production line.

3. Aluminum profile electrostatic spraying gun fluorocarbon spraying: first, the workpiece is placed on the production line, and then the preliminary treatment is carried out to obtain the automatic electrostatic spraying primer, and the electrostatic spraying gun or rotating cup is used for spraying. Then wait for the primer to be leveled, spray paint on the self-contained electrostatic spraying surface, and then use the electrostatic spray gun to carry out the top coat leveling, and then use the electrostatic spray gun to automatically spray the finishing paint. Wait until the finishing paint is leveled, turned into a solid state, and cooled naturally, until the workpiece is removed from the production line.

Corporate Introduction:

Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10 (Sanjiang market) of Leping Town, Sanshui District, Foshan. The company was founded in 1997. It is a comprehensive and large-scale aluminum profile enterprise integrating the research and development, production and sales of aluminum alloy profiles. The company is leading the "Hong Ying" brand. Strong comprehensive strength and excellent service make Yong long "Hong Ying" sell well all over the country and exported to Southeast Asia, Europe, South America and many other countries.

Our company has 900 employees, including 120 high and intermediate engineering technology and management personnel, with advanced and perfect design, production, testing and testing methods as well as perfect sales network and after-sales service system. The products sell well in more than 10 national and foreign ports, Australia and Taiwan areas.

Corporate Advantages:

1.24 years' experience and advanced equipment

2.Customize: We can manufacture according to your size and shape of such aluminum profile;

3.Strong production capacity - 28 extrusion lines, 50,000TONS/Year

4.One Stop Service Specialized in mould, extrusion, anodizing, powder coating, wood grain and Processing;

5.Shortest Delivery , competitive prices and excellent service