Conference System Flushmount microphone base

Overview

VIS-GSK-F is a flush mount gooseneck microphone base that can be connected to all range of VISSONIC M series microphones, the microphone can be removed from the base when it’s not in use. The overall base is small and exquisite, with a touch button to switch the microphone on and off. It can be connected to the VIS-AIB analog microphone connection box and used in the CLEACON conference system, or it can connect to an analog system, such as the VIS-FS100-A automatic feedback suppressor, mixer, audio processor etc.

Features
●Built-in microphone socket, suitable for VIS-M series 6-pin gooseneck microphone
●It is used for inconspicuous installation on the desktop with compact design.
●Capacitive touch switch button can be optionally installed to easily set the microphone off or on for sound pickup. The built-in switch can be used for control from remote equipment.
●Touch button comes with LED status light, operates with phantom power, provides white / red two colors
●Operation with 24-48V phantom power
●Output with 3-pin XLR or 3.5 Phoenix connector
●After inserting the microphone in place, the microphone comes with fasten lock, and the microphone can only be removed after unlock it
●Built-in RF filter
●Equipped with rubber isolators to reduce vibration noise on the installation surface

Technical Parameters

Output impedance: 360 Ω

control
High level when in down position: (DC + 5V);
Low level when in up position: (DC 0V)

LED indicator
High electric level DC + 5V): red /
Low electric level (DC 0V): white

Phantom power
DC: 24-48V,
Power Consumption: 4 mA typical

Switch
Touch control
Weight: 65 g
Dimensions: length 128.2 mm, maximum width 55.3 mm

Accessories
One set of metal fixing ring for standard installation, one pair of shockproof isolators

System Diagram

Application