Cylinder rotating sludge dryer in drum drying equipment, coal-heating drum drying equipment

Brief Information of Sludge Dryer Drying Machine:

Rotary dryer applies into making building-material, metallurgy, chemical and cement industries, drying slag and clay etc, composed by rotation part, scatter plates device transmission part, supporting device and sealing part etc, with the advantages of reasonable structure, high output, low energy consumption, stable running, and convenient operation.

Features of Sludge Dryer Drying Equipment:

• The inner wall is made by wear resistant manganese plate which is 3-4 times stronger than ordinary steel.
• If the materials initial moisture is15%, the final moisture can be 0.5-1% or less, which is suitable for drying slag powder of cement plant or dry mortar production line.
• The thermal efficiency is 40% which is higher than the traditional single rotary drum dryer.
• The fuel can use anthracite, bituminous coal, coal, oil and gas. The dryer can dry 20-40mm blocks, pellets ,and powder materials.
• Easy for installation. The occupied area is 60% less than the traditional single rotary drum dryer which required lower construction investment.
• No air leaking out from the dryer which is completely solve the sealing difficulty.
•  The material discharge temperature is ≤60 °C, and the dried material can be stored without shed cooling.
• The temperature of outer cylinder is ≤60 °C, the temperature of exhaust gas is <120°C, which extend the usage life of dust collector bag 2 times or longer.
• The energy consumption is 40% lower than traditional single rotary drum dryer.

In order to quote you the right drying machine equipment in best price and better way, we would like to get the following information include in your inquiry or fill in the selection form as following:

• What is the raw material?  Material related characteristic? Does it corrosive, strong basicity, or highly acid? Please confirm.

• What is the capacity per hour you need (kg/h)?

• What is the initial moisture and final moisture of finished products you require to get?

• What about the maximum heat temperature of raw material?

• What kind of fuel you use to heat the dryer? Natural gas, electricity, fuel oil or steam?

• Which equipment material do you like prefer? SUS304, SUS316L or Carbon steel?

• Provide us your country’s electricity information, such as phases, voltage, HZ?

• How about dust collect requirements?

• Other special requirements.