1. Purpose
Single-use unipolar surgical electrodes combined with high-frequency electrocoagulation equipment for medical units to perform surgical operations.
2. How to use
Insert the triangular plug of the surgical electrode into the corresponding socket of the main unit of the high-frequency electrosurgical unit. If the main unit has no alarm and the meter displays normally, then the surgical electrode can be put into working state, press the small dot button on the top of "CUT" to switch the electric cut, press "COAG" The button without a dot is an electrocoagulation switch. The suction tube is connected to the suction device, and the suction function is activated synchronously when the electrocoagulation is started, and the smoke generated by the electrocoagulation is attracted to the closed suction system. Put on the straw, pull out the suction nozzle, and suck the pus and blood from the surgical site.
Three, basic parameters
1. Length of knife shell (cm): 17cm
2. Length of cutter head (cm): 7cm
3. Diameter of cutter head: 2.36mm
4. Wire length (m): 3m
5. Frequency range: OMHZ~1.0MHZ
6. Maximum output current: 1A
7. Load impedance: 200Ω
8. Sterilization method: ethylene oxide or irradiation
9. Sterilization validity period: 2 years
Four, matters needing attention
1. The applicable operating environment for surgical electrodes is: relative humidity ≤80%.
2. The outer packaging bag is damaged or not sealed, so it is prohibited.
3. This product is a unipolar surgical electrode. Install the negative electrode on the patient before using it.
4. Surgical electrodes beyond the sterilization validity period are prohibited.
5. If the surgical electrode fails to switch during use, stop using it immediately, and remove the surgical electrode plug from the high-frequency host, and replace it with a normal surgical electrode.
6. When transporting this product, handle it with care, the packing box should not be pressed heavily, pay attention to sun protection, and avoid humidity or high temperature in storage.