Epoxy Coated Wire Mesh
1. Base material :Commercial grade, low carbon steel C1006.
2. Mesh wire diameter:0.18±0.0076mm(Before coating)
3. Tensile strength: 57000 PSI max.
4. Extension rate: 15% min(Annealed)
5. Weave: Rectangular,Plain mesh 18x14 (Before coating)
Warp:18 tol±2%/Inch (Before coating)
Fill: 14 tol±5%/Inch(Before coating)
6. Coating: Epoxy powder, Electrostatically applied.
7. Base material and coating must withstand a sharp 180 deg. without cracking.
8. Supplied on 3.00 x 3/16(0.1875) inch minimum wall core.
9. The mesh should not be flanging, cutting off and folding.
10. Master roll to be designated as follows with a tolerance of ±1/16-inch