Shandong ZhongCansteel New Material Co.,LTD. Is a modern integrated production enterprise which
incorporates the processing & manufacturing of Cold-rolled Steel, Galvanized Steel,
Galvalume Steel, and Prepainted Steel, sales and logistics.The total investment of the project
is 2.6 billion RMB, covering an area of 128.5 acres, with an annual capacity of 1.5 million tons.
Galvanizing steel production line with annual output of 200000 tons, which adopts the mo
st advanced American GBNB and Germany's Siemens electrical control systems. it can produce ZERO
zinc spangle, small-zinc spangle and common zinc spangle etc.Thickness from 0.125 mm to 4.5mm,
and width from 500 mm to 1250 mm, and zinc coating from 40 - 275 g/m2,surface passivation and oil
-coating can be performed. In addition, the company introduces a slitting machine, which can meet
the customers' different requirements on the width. And Two roll-formed machines , which can produce
wave roofing sheet and Trapezoidal corrugated sheet.
The sheets is packed with PVC film or water-proof kraft in the first layer, the second layer is
iron sheet package, then wrapped on the metal pallet or metal square tube with steel strip.
It's is water-proof and sea-worthy, and warmly welcomed by the customers.OEM accepted, besides,
the pakage can also be according to your demands.
Our service
Cut large coils into small coils.
For steel coils, we can cut one large steel coil into small steel coils for loading at seaport;
because for container shipping, each container usually loads weight can not be over 26 tons, but
each large coil is usually about 28 tons, so one large coils has to be cut into small coils,
and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner,
each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually
demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
Open flat coils into steel plate.
For final application, need open flat the coils and cut the coils into steel plate, so we open
flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading
by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to
cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into
steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.