Four Bolt square Flange mounted units pillow block bearings UCF210

Product Discription:

Pillow Block Bearing

Pillow blocks are usually referred to the housings which have a bearing fitted into them and thus the user need not purchase the bearings separately.

They are usually mounted in cleaner environments and generally are meant for lesser loads of general industry.
The fundamental application of both types is the same which is to mount bearings safely enabling their outer ring to be stationary while allowing rotation of the inner ring.

The housing is bolted to a foundation through the holes in the base. Bearing housings are either split type or unsplit type. Split type housings are usually two piece housings where the cap and base can be detached, while certain series are one single piece housings. Various seals are provided to prevent dust and other contaminants from entering the housing.

Thus the housing provides a clean environment for the expensive bearings to freely rotate, hence increasing their performance and duty cycle.

Drawing and dimensions:

Detailed Product Pictures: