Fully Automatic Spark Ignition Engine Fuel Total Sulfur in Oil Analzyer
Fully Automatic Spark Ignition Engine Fuel Total Sulfur in Oil Analzyer
Application
This UV Sulfur Tester complies with ASTM D5453 and SH/T 0689 for the determination of total sulfur in crude oil, distillate, petroleum gas, petrochemicals and food, etc.
Working Principle
The instrument adopts the ultraviolet fluorescence method: after the sample to be tested is suctioned into the high temperature pyrolysis furnace, the sample is completely vaporized and oxidatively cracked at a high temperature of about 1050℃.The sulfide is quantitatively converted into sulfur dioxide. The reaction gas is carried by the carrier gas, and the water is removed through the membrane dryer and then enter into the reaction chamber. Sulfur dioxide is exposed to ultraviolet light of a specific wavelength, and the absorption of such rays causes some electrons to turn to high energy orbits. Once the electrons return to their original orbit, the excess energy is released as light and is detected by photomultiplier tube at a specific wavelength. The emitted fluorescence is completely given to the sulfur and is in direct proportion to the sulfur content in the original sample. In direct proportion. After being amplified by the micro-current amplifier and processed by computer data, it can be converted into an electrical signal proportional to the light intensity. By measuring the intensity, the sulfur content of the corresponding sample can be calculated.
Features
1.Windows operating platform, man-machine dialogue, easy to operate.
2. The detector of the core part is adopts patented light and gas anti-leakage technology, which has high sensitivity, low noise, wide linear range and strong anti-interference ability.
3. Adopts international popular circuits and imported devices (UV lamps, filters, membrane dryers, etc. are all imported); The whole machine performance has reached international advanced level, which is superior to similar domestic products and can replace imported machine.
4. High pressure can be adjusted freely. Standard calibration can be adjusted by single point, which is convenient, fast and accurate.
Technical Parameters
|
Measurement range |
0.5mg/L~10000mg/L ~% |
|
Sample state can be measured |
Solid, liquid, gas(corresponding sample injector is optional) |
|
PMT high voltage range |
DC400V~900V(according to the level of the measured concentration, set the required value through the operation system.) |
|
Temperature control range |
Room temperature to 1300℃ |
|
Temperature control accuracy |
±3℃ |
|
Repeatability error
|
0.5mg/L≤X<1.0mg/L,≤±0.1mg/L 1.0mg/L≤X<100mg/L,Cv≤10% 100mg/L≤X≤10000mg/L,Cv≤5% |
|
Configuration |
Host (data acquisition, control system), cracking furnace, autosampler and computer (operating software included). |
1.Karl Fisher Oil Water Content Tester BLS-6304
2.Digital Oil Moisture Meter BLS-D6304
3.Petroleum Products Kinematic Viscosity and Viscosity Index Tester BLS-445
4.Digital Kinematic Viscosity Meter BLS-D445
5.Fully Automatic Petroleum Products Acidity Meter BLS-974
6.Cleveland Open Cup Flash and Fire Point Tester BLO-92
7.Pensky-Martens Closed Cup Flash Point Tester BLC-93
8.Pour Point and Cloud Point Tester BLS-97
9.Petroleum Products Density Meter BLS-1298
10.Copper Corrosion Tester BLS-130
11.Petroleum Products Aniline Point Tester BLS-611
12.Petroleum Products Colorimeter BLS-1500
13.Petroleum Products Carbon Residue Tester (Micro Method) BLS-4530
14.Petroleum Product Vapor Pressure Tester (Reid Method) BLS-3231
15.Total Acid Number and Total Base Number TAN/TBN Tester BLS-2896
16.Petroleum Products X-ray Fluorescence XRF Sulfur Analyzer Sulfur BLS-4294
17.Petroleum Products Online Moisture Meter BLS-PPM
18.Online Moisture ppm Meter/ Particle Counter/ Pollution Degree Analyzer NAS-01
19.Petroleum Products Saponification Number Tester BLS-94
20.Micro Coulometry Sulfur and Chlorine Content Tester BLS-3120
21.Ultraviolet Fluorescence Sulfur Analyzer BLS-5453
22.Conradson Method Petroleum Products Carbon Residue Tester BLS-189
23.Ramsbottom(Electric Furnace) Method Petroleum Products Carbon Residue Tester BLS-524
24.Hydrogen Sulfide in Liquefied Petroleum (LP) Gases Tester (Lead Acetate Method) BLS-2420
25.Hydrocarbon Types in Petroleum Products Tester by Fluorescent Indicator Adsorption BLS-1319
1. Outside package: Standard export packing or neutral packing if needed, carton box, wooden case or upon request, packing carefully.
2. Inside package: strength film and foams.
Shipping Method: Air / Sea / Express(UPS, FEDEX, DHL, TNT, EMS, etc)
1. What's the payment method?
Payment can be done by cash T/T, L/C, Western Union, Alibaba Trade Assurance,etc.
2. How long is the delivery period?
Generally it takes about 10 working days for production and then the delivery will be done timely.
3.What's the package made of?
The package is made of international export standard wooden case.
4.What's the delivery method?
By train, by air, by sea, by truck, by express(TNT, DHL, FedEx, Ups, etc).
5. How long is the guarantee period?
The guarantee period is 2 years due to the product quality problems itself.
6.What services can you provide?
Online support through email, telephone, Whatsapp or other communication method; onsite taining and installation if you need; filed maintenance and repair, technical video support, etc
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier