GAW-718 Wireless Microphone Tour Guide Explains Lightweight Portable Microphone Voice Conference Hanging Neck

GAW-718 Wireless Microphone Tour Guide Explains Lightweight Portable Microphone Voice Conference Hanging Neck

Power off: long press the power button of transmitter and receiver for 3 seconds.

This product has been paired by default when leaving the factory and can be used when starting up. In case of multiple machines
using serial frequency at the same time, simply press the transmitter power on key to change frequency.
One transmitter of this product can be paired with up to 10 receivers at the same time
In the case of replacing the transmitting or receiving equipment, it is necessary to repair. The pairing operation instructions
are as follows:

1. Transmitter operation:
Long press the power button for 3 seconds in the shutdown state. When the power indicator flashes, the transmitter will enter the
frequency-matching state.
2. Receiver operation:
When the transmitter enters the frequency-matching state, turn the receiver on, wait for 2 seconds and then press the receiver
power-on key. When the receiver indicator flashes for 3 seconds, the pairing is successful.
Press the transmitter power button to automatically lock the frequency and complete pairing.
System parameters:
Frequency range: 650MHz-690MHz
Modulation mode: digital modulation
SNR: 96dB
Frequency response: 30hz-18khz
Distortion: <0.1%
Dynamic range: 96dB
Delay: 2.5 ms
Frequency points: up to 48
Transmitter power: 10mW
Receiver sensitivity: -96db
Use time of transmitter end: 5 hours 3.7v 400mAh
Receiver service time: 5 hours 3.7v 400mAh
Charging time: 2 hours
Charging adapter: 5V 800mA

Product Description