Production Introduction
1. Electrical controlling system
(1) We adopt the Japan or Germany high-effect PLC controlling system.
(2) Using the touch panel, you can set, modify, adjust and monitor the parameter.
(3) Adopt the import inverter speed regulation system, all of our machines use the SIEMENS motors, quality stability, reliable and energy saving.
2. Hydraulic controlling system
We adopt the double proportion servo control technology. The selecting of oil pump, circulation board and the unique filter system, make the oil circulation with fast speed, stability in reducing speed, low noise, energy conservation and long duration.
3. Pneumatic system
Adopt our original creation double station starting and controlling system, left and right station, each station controlled by the blowing parameter. Every units, we use the top brand products.
4. Extrusion screw and nosing runner
We use the international advanced solidworks designing CAD/CAE, two layer runner designing, color change fast, high quality parison.
5. Double station die assembly structure
Adopt the three board three rod structure, the moving of left and right station controlled by the oil cylinder, position accurate
Parameter for Blow Molding Machine
Model No. | WT-100U |
Max. Product Volume | 20L |
Dry Cycle | 700pcs/h |
Screw Diameter | 100mm |
Screw L/D ratio | 25L/D |
Screw motor power | 44-45kw |
Screw heating capacity | 8.5-10kw |
No. Of heating zone | 4 Zone |
Output of HDPE | 200-280kg/hr |
Oil pump driver power | 30kw |
Clamping force | 190kN |
Mold stroke | 350-800mm |
Size of mold | 650*700mm |
Moving distance | 700mm |
Max. Die diameter(W*H) | 260mm |
Die heat capacity | 5.0-6.0kw |
Blowing pressure | 0.8mpa |
Air volume | 2-3M³/MIN |
Cooling water pressure | 0.7mpa |
Water consumption | 90L/min |
Weight of machine | 20Ton |
Size of machine | 5*3.8*3m |
