The flexible lifting door is a kind of wide-body soft curtain lifting and stacking automatic door.
The door is mainly composed of curtain fabric, bead, guide rail, lower lintel, curtain fabric fixing frame, upper curtain fabric fixing frame, main engine lifting mechanism, rope pulley, safety protection device (anti-falling device), control system and other components.
The inner and outer sides of the lintel under the gate are sealed with fabric, which has good sealing and heat insulation when the gate is closed.
The bottom of the gate adopts windproof fixing device, no dust outside
The flexible lift door is controlled by a special control box and a button box. The control system is equipped with a door body stroke and limit detection program to monitor the door body limit in real time.
Press the door open button, the corresponding reducer starts to rotate
The moving steel rope pulls up the door] The lintel at the lower part of the body moves up along the guide rail, the curtain is folded, and the limit switch automatically controls the door body to stop moving after it is opened in place
In the process of opening and closing the door, the door body can be stopped at any height because the door body runs in a jog type.
In case of special circumstances, as long as the "emergency stop" button is pressed, the power will be cut off and the door will stop running. During the opening and closing process of the door body, the sound and light alarm device on one side of the door body acts to remind attention.
People and vehicles are prohibited from passing through the gate during the opening and closing process. There are reflective film material level indicator stickers on both sides of the gate
Working voltage/frequency: 380V/50Hz | 380V/50Hz |
Motor power: | n×1.5-3W (n is the number of active panel leaves) |
Running speed: | ≈0.17m/s |
Door thickness: | 200-530mm |
Adaptable temperature: | -40℃~50℃ |
Wind pressure resistance:
|
650N/m2
|