JH Medical Disposable Coverall ( Ethylene Oxide/Radiation Sterilization)

【Product name】Medical disposable coverall
【Product material】 PP+PE coated non-woven fabric
【Executive standard】GB 19082-2009
【Model】 One-piece
【Specifications】 160, 165, 170, 175, 180, 185
【Scope of application】 It can be applied for epidemic protection,biological isolation, anti-bacterial and seepage-proofing, chemical experiment and as routine isolation in medical outpatient, wards and laboratory.Mainly used for barrier and protection of potentially infectious patients' blood, body fluids, secretions, etc., which are contacted by clinical medical staff at work.
【Packaging specifications】 Outer hard paper box 60×40×40 cm, 40 pieces per box, each piece is individually vacuum packed.

Specification and Size of (One piece) Medical Disposable Coverall （Unit：cm）
Specification Body length Waist width across Sleeve length Sleeve opening Leg opening
160 165 120 84 18 24
165 169 125 86 18 24
170 173 130 90 18 24
175 178 135 93 18 24
180 181 140 96 18 24
185 188 145 99 18 24
Deviation ±2

【Product feature】The product is made of high efficiency powerful protective PP + PE laminated membrane material. It is produced by high density non woven polypropylene fiber with a special process. After being cut, it is sealed with heat-sealing adhesive tape, and made into a structure of coveralls with hood.
(The product is produced in Class 100,000 clean workshop, using the best heat-sealing adhesive tape provided by manufacturers from Dongguan City, Guangdong Province. This kind of tape is soft, low-temperature, environmentally friendly, light-weight, and can be adhered rapidly and firmly.)
【Main structure】 The protective clothing is composed of hooded tops and trousers. The cuffs and ankles are elastically closed. The face and waist of the hat can be closed with elastic, drawstring or buckle. The key parts are the front chest, arms and back.
【Main performance】
1. Water resistance: the hydrostatic pressure of the key parts of the protective clothing is lower than 1.67 Kpa (17cm H2O)
2. Moisture permeability: the moisture permeability of protective clothing materials is less than 2500g/(m2.d)
3. Anti-synthetic blood penetration: The anti-synthetic blood penetration of protective clothing is less than 1.75 kPa.
4. Surface moisture resistance: The water level of the outer side of the protective clothing is lower than the level 3 requirements.
5. Breaking strength: The breaking strength of the key parts of the protective clothing is less than 45 N.
6. Elongation at break: The elongation at break of the key parts of the protective clothing is less than 15%.
7. Filtration efficiency: The filtration rate of non-oily particles at key parts and joints of the protective clothing are both less than 70%.
8. Antistatic property : The charge of protective clothing is greater than 0.6μC/piece.
9. Static attenuation performance: The static attenuation time of protective clothing materials doesn't exceed 0.5 s.
【Contraindications】 Use with caution if you are allergic to non-woven fabrics.
【How to use】Before wearing: Check all parts when wearing to make sure that there are no missing or damaged parts; remove your watch and other accessories; put on protective clothing and pull the zipper to the end; put on protective boots; bring related filter masks, and make sure it fits tightly; put on safety glasses; cover the head with the hood, and fully zip up the protective clothing. Press the front placket to cover the chin and zipper. Put on safety gloves and pull over the cuffs of the protective clothing. After use: disinfect the safety gloves first; pull down the hood, take off the protective clothing to the shoulders, turn it over to the buttocks. At the same time, pull the hand out of the sleeve. At this time, another person can help, but you must wear a mask and safety gloves; completely take off the protective clothing and safety boots; take off the safety gloves by turning outwards; take off the safety glasses from the back , and put it in the designated storage place. Remove the filter mask at the same time. Disinfect your hands, and then thoroughly clean your hands, face and other part of your skin that may be contaminated with water and disinfectant.
【Precautions】
1. This product is a one-time use product and must not be reused;
2. After the product is used, it should be processed according to the requirements of the relevant authorities;
3. Sterile products are recommended to be used in places with strict microbiological index control such as isolated intensive care units (rooms), and non-sterile products are recommended to be used in isolated observation areas (rooms) and isolated wards (rooms).
4. After this product has been used, the expiry date should be handled in accordance with the "Medical Waste Management Regulations".
【Transportation conditions】 This product should be loaded and transported in covered carriages and spaces, and kept clean to avoid heavy pressure, sun, and rain.
【Storage conditions】 It should be stored in a clean room with a relative humidity of no more than 80%, no corrosive gas, and good ventilation.
【Sterilization period】 Ethylene oxide sterilization period is 2 years, and irradiation sterilization period is 1 month.
【Sterilization method】The product is sterilized by ethylene oxide/irradiation.
【Explanation of graphics, symbols, abbreviations, etc. used in product labels】

Sterilized with Ethylene oxide Sterilized with radiation Non sterile

Instructions No secondary use Batch code

Keep away from sunshine Keep away from rain Be careful when the

package is broken