LCD Screen Heating Floor Electronic Wireless Wall Thermostat For Home

This ST2401RF is Non-programmable digital thermostat and has many convenient features. Some of its features include: big lcd display easy to read, simple operation with slide switches selecting heat/off/cool mode operating the devices.It has 6A/16A/20A/30A,230V power supply that it can connect the boilers,electric film,electric valve,expansion valve,thermal actuator,etc..If you have any technical question,please contact us.

Warranty information accompanying this non-programmable thermostat is a 2-year warranty.

Specification:

Model No.: ST2401RF
Name: Digital Boiler Room Thermostat

Transmitter:

Temperature Range (°C): 1.0°C~40°C (in 0.1°C increments)
Control Temp.Range (°C): 1.5°C~35°C (in 0.5°C increments)
Temperature measurement accuracy: ±1°C (at 20°C)
Programmability: Non-Programmable
Backlight colour: White/Blue/Orange,etc
Standby current: 5uA, Lighting current ≤ 4.2mA
Dimensions: 120 x 77 x 28 mm

Receiver:

Power Supply: 180-230VAC , 50HZ
perating Frequency: 868.35MHZ
Transmission Distance: approx. 100m in open terrain
Maximum Load: 6A/16A/20A/30A
Dimensions: 86 x 86 x 26 mm

>>Transmitter:
1.Running Mode
Hold the dial button for 5 seconds to access the system running mode switch, then turn the dial to choose different mode between:
HEAT (Heating): adjust the temperature by turn the dial
COOL (Cooling): adjust the temperature by turn the dial
OFF (Frost Protection): it will start heating when the room temperature is under 7°C

Then press the dial again to confirm the running mode or wait for 10 seconds to confirm the setting automatically.

2.Calibrate the temperature
Temperature calibration and SWING settings: Hold the dial for 5 seconds to access to the mode switch setting and select HEAT or COOL mode, then press the dial to access the interface of temperature calibration “CAL” (in -3.0~+3.0, in 0.5°C increments); turn the dial to set the desired value, then press the dial again to set the Swing value between 0.2~2°C.

3.Restoring thermostat to factory default
Remove the batteries then put it back, hold the dial until display the full screen then release, the defaul running mode is HEAT, it means the thermostat has been restored to factory default settings.

>>Receiver:
1.Manual receiver control
Press the MANUAL button to separate to the thermostat from the receiver. In this case the boiler or the air conditioner connected to the receiver can be turned on or off manually without temperature control. Fixed green light indicates the MANUAL mode. Press the M/A button to activate or deactivate the boiler. (The red LED lights up when the boiler is on). Press the MANUAL button to stop manual control and resume automatic operation (thermostat-controlled) (the green LED turns off).
2.ON/OFF button on the receiver
O: OFF
When there is no need to use the thermostat, the users can just turn OFF (by the left side of the receiver) to power off the receiver and it does not need to remove the front case.
I: ON
The receiver is normal operating;

1.7-30days,according to the quantity and our stock.

2.usually by express,such as TNT,DHL,UPS,EMS,PEDEX,etc.Will take about a week from sending to get to your address.

3.Warranty:We are responsible for any defects in quality or workmanship withun one year and repair them free of charge within one year.

FAQ:

Q1. Can I get any discount?
A1:Yes.The price is negotiable, we can offer you discount according to your order quantity. If you are buying in bulk for an occasion, We offer you wholesale price. We also have promotions several times a year.
Q2. How much are the shipping costs?
A2:Shipping cost is charged by the package's weight and related to the shipping methods you choose and your destination.
Q3. Do you offer samples?
A3:Yes.You can buy 1pcs in first order to check the quality. then we send some other designs small cutting as samples with your order.
Q4. How many styles for my select?
A4:Many types for your choose or as per customized.
Q5. I am a designer, Can you help me to produce the sample which we designed?
A5:Yes.We have a professional team to cooperate with you.
Q6. Can you make OEM or ODM service?
A6:Yes. We can accept OEM service. Also we have our own designer team. So it's also welcome to choose our ODM products.
Q7. Tell me your company's strength, because I want to place order to you.
A7: Our company has a long-time experience in thermostats, also we have R&D team in thermostats,we have many famous clients around the world.
Q8. Do you have some special policies for Brand company?
A8:Yes, we have some special support for the company who has own brand but also in our VIP customers list. Please send us your selling data of last year, so that we could support you the products in your market.