Working Process
The high speed rotation of the rotor generates vacuum and quickly sucks powder into the working chamber, and powder is thus evenly distributed into the fast liquid stream. As powder is completely absorbed into the liquid instantly at the outset, no lumping develops in the mixture and no skinning in the shaft or interior wall of the container. This is different from the traditional process, which easily results in hard skinning. Thus the PLM system dramatically enhances product quality. As a vacuum is created by the liquid stream, powder flows continuously into the liquid, and auxiliary environmental protection devices fitted in traditional processes are unnecessary. More and more mixing processes call for powder and liquid dispersing, and this cannot be satisfactorily completed by traditional agitators. During this type of production problems invariably accompany the process such as: dust, lumping, skinning, micro dust loss, environmental pollution, and occupational health for workers.
Note:
1.The output data of the liquid is the medium of water, the solid phase is measured by white sugar as the medium, the viscosity of the liquid and the bulk density of the solid water content will have a great impact on the output.
2.The equipment can be customized according to customer's material, in order to meet the needs of the process. Like high viscosity , strengthen the function of homogeneous, heat sensitive materials etc.
3.Interface way can choose (hoop, thread, and flange).
4.Material of the pump body can choose SS 304, SS 316, SS316L, 2Cr13,9Cr18 etc.
5.Sealing material: Standard rubber ring is silicone rubber, according to the media requests; you can choose fluorine rubber, EPDM, PTFE
6. Frequency speed regulation, non frequency speed regulation, explosion proof design, non explosion proof design.