PUR hot melt adhesive for film to fabric lamination

JUR-627 is a reactive hot melt adhesive which is High Initial Strength based on polyurethane for lamination of textiles as fabric, EVA and TPU film.

This product has been formulated to give very high initial strength, excellent final strength, wash-cleaning resistance and good flexibility after final curing.

Product benefits:

Very good tack and initial strength

High final strength after curing

Good flexibility

Excellent wash-cleaning resistance

Broad adhesion spectrum

Technical Product Data:

Chemical Base:                             Polyurethane reactive hotmelt

Apperance:                                    High thick semi solid

Solids Content:                             100 %

Reaction Mechanism:                     Moisture curing

Density:                                        1.15~1.18g/cm3 @ 25°C approx.  

Suggested Application Temperature:           90 - 120°C (short-term 140°C), suggest 100°C

Viscosity  (Brookfield Thermosel ) :            90°C 2,000 mPa.s approx.

Application Method :                         Nozzle or coating roller systems.

Open Time:                     Depends on procedure, temperature and substrate, but typically ca. 10 minutes.

Storage Life :                  Six months in unopened pails and drums and under dry  conditions at 0 ~30°C.

Packaging information:

Metal Drums     200 kg

Metal Pails       20 kg

Health and Safety :

To minimise the risk of burns, the use of eye protection and protective clothing is recommended when working near a hot melt applicator. To minimise the risk of flammable vapours, do not exceed a melt temperature of 200 °C.