1、The
filter plate of the cantilever filter press is usually square or rectangular.
The upper part of the filter plate is fixed on an "n" shaped hanger.
The upper part of the hanger is connected to a trolley with two wheels. Slide
on the I-beam track inside the top beam of the filter press. The movement of
the filter plate is driven by a conveying device installed at the top. It can
automatically and smoothly transport the filter plate from the closed position
to the open position one by one by the torque limiter.
In contrast, when the
filter plate of the side bar filter press is moved, it is necessary to manually
lift the hangers on both sides of the filter plate on both sides, or use two
hydraulic push rods to push the filter plate group. The device for moving the
filter plate is also more complicated.
2、If
the filter plate is fixed by a cantilever, the entire side including the filter
plate hanger is fully displayed in front of the operator, so the operator only
needs to stand next to the filter press to easily observe whether there is
residue on the filter cloth The mud cake, and whether the filter cloth needs to
be cleaned, it is also very convenient to replace the filter cloth.
3、In
the same way, the filter cloth of the cantilever filter press's cleaning is also very convenient. The fully automatic cleaning
arm can be rotated 90 ° from the side of the filter plate. More ideal cleaning
effect.
In contrast, the side bar filter press cleaning device generally extends
from the upper part of the filter plate into the filter plate, and the sludge
dewatering workshop requires a higher headroom.Because of the blocking of the
side bars, the cleaning effect does not look comprehensive.
