8 Zone Voice Evacuation Controller
Description
1. Built in 650W high-efficiency power amplifier, integrated 8 power A + B independent dual-speaker loop zone output,
each zone has independent LED indicator, independent output control buttons and volume adjustment
2. 4 audio balanced input interfaces for playing any audio source in the zones
3. Local emergency PTT microphone input and emergency voice can be configured by PC software to be played
in specific zone
4. Integrate independent MP3 playback module, support USB, SD card and FM tuner function.
5. Automatically detect the working status of each zone loop (fault, normal)
6. The 8-channel trigger input/output port can trigger the emergency voice preset by the PC software to the
specified zone or the corresponding external power source to the corresponding event warning.
7. Support third-party emergency audio input (user-defined emergency audio source)
8. Integrated independent EVAC/ALERT voice information player
9. There are online interface for the remote paging microphone and fireman microphone.
The connection between each paging station uses standard RJ-45 network port and standard CAT-5 network cable.
The voice transmission uses balanced transmission mode for long-distance transmission
10. Controller online interface can be connected to the slave unit, it uses standard RJ-45 network port and standard
CAT-5 network cable
11. 1 Channel TCP/IP communication interface, supports visual interface operation based on Window platform,
and the system status can be automatically synchronized
12. Support DC24V battery backup power supply
13. With power amplifier monitoring function
14. Support PTT recording function, no external equipment required
15. With System fault output, emergency dry contact output and dry contact reset input for emergency status
16. The zone output has three-wire and four-wire over-ridding adjustment function
17. With IP address reset function and impedance calibration function
18. The master-slave unit is integrated, and the device can be used as a controller or a slave unit by setting DIP address,
and the maximum of 19 slaves can be simultaneously online.
19. The system can extend the number of the zones by slave units, it support 160 zones maximum