Rural Water Pump Self-Priming Water Pump 50gpd Inlet 0psi 0.5lpm 70psi Max 120psi Ec804-100

E-CHEN Self-Priming RO Booster Pump 804 Series

The difference between booster pump and self-priming water pump

The max start water pressure of ro purifier is 0.05Mpa, and this two kinds both can boost pressure.

Boost pump is used when the water level of middle of pipe is higher than the pump, especialy with the water pressure environment. The ro boost pump can increase the value of tap water pressure by 0.3-0.5Mpa, which makes the tap water can through reverse osmosis RO membrane to achieve filteration.

Self-priming water pump is used when the water level of middle of pipe is lower than the pump such as the water pressure environment of well,underground water and self-built housing etc.

Generally speaking, the boost pump is similar to the naturally aspirated principle of automobile, and self-priming water pump is similar to the turbo boost.

A compact size of 304 series. Economic pump but still powerful as 304 series. Suite for pipeline pressure 0-10 psi. E-CHEN's RO booster pumps provide reliable outlet pressure for efficient membrane utilization. Available at 50 and 75 GPD.

Features

Patented product
Compact design
Low noise
High efficiency
Self-Priming
No decompression
Low power consumption
No water leakage problem
No influence from climate or temperature

Materials of Construction
Nylon Housing
EPDM Valves
Santoprene Diaphragm
Stainless Steel Fasteners

Applications
Pre-Filter Water Treatment
RO Boost
Carbonation Systems
Misting Systems
Medical Labwater
Fuel Cells

Packing
Net Weight: 1.5 kg each
Groth Weight:  12 pcs, 20kg
Carton Size: 50 x 26.5 x 35.5 cm