The SPS-M/A Series DC Power Supply System supports two series cabinets based on the control mode : SPSM and SPSA. The maximum output voltage and current of a single cabinet is up to 2250V and 3000A respectively. Output power of a single cabinet is up to 180kW. Support master-slave configuration to increase the output capacity to 576kW. SPSM series cabinets use world famous circuit breaker to control the input of each power module inside. After power on, the specified 3U or 6U height power supply will be configured as a Master to control all of the slave units. CSP is the Master in SPSA series cabinets, which is equipped with a PDU (Power Distribution Unit) and a CSP (Control & Supervisory Panel). The PDU consolidate microprocessor and management of hundreds of thousand VA AC mains in a 5U/8U height chassis. The CSP will display the input and output parameters of this system. The touchpanel provides a complete, intuitive user interface for users to easily manage all configuration, setup and update. Full protection designs prevent potential injury.
Large color touch screen, rotary knob and keys provide an excellent operational experience.
Equipped with Emergency Stop, physically off all managed DC power supplies at once.
3-phase input voltage meets worldwide power distribution regulation, AC mains 187~308Vac/340~480Vac for optional.
Constant voltage (CV), constant current (CC) and constant power (CP) operation mode, CC or CV working priority setting.
Standard RS232/RS485/USB interface, optional LAN & GPIB interface, optional CAN interface.
Adjustable voltage/current slew rate.
Smart 3-stage charging algorithm simulation.
Full protection: OVP, OCP, OPP and OTP protection.
Back door with protect switch, safe to the operator.
List/ Step mode programming.
SCPI compatible, provide web GUI function.
