It's QS electric In-Wheel Scooter Hub kits, suit for electric scooter 72V 90km/h, rear tire size 130/70-12.
One set including below kits
1. 1PC X QS 12*3.5inch 5000W V4 BLDC E-Scooter In-Wheel Hub Motor
2. 1PC X QSSVMC72200 sine wave controller
3. 1PC X MQ Blue-tooth adapter
Key Features
1). Simplify to make a electric-scooter. Gearbox, transmission shaft, clutch are no need. Which save space.
2). It could be installed in the rear to save more space for battery.
3). Support regenerative braking
4). High efficiency: 85~92%
Product description
QS 12*3.5inch 5000W V4 BLDC E-Scooter In-Wheel Hub Motor
1. Specification
Motor Type: BLDC Outer Rotor In-Wheel Hub Motor With Hall Sensor
Brand: QS Motor, QSMOTOR
Motor Design: Double axle with 12inch moped rim (integrated)
Rim Size:12x3.5inch, matched tire:130/70-12 etc
Magnet Height: 45mm, 16 pole pairs
Stator: Aluminum Core
Rated Power: 5000W
RPM: 72V@660rpm/765rpm/930rpm/1185rpm(Optional)
Work voltage option: 96V/72V/60V/48V(Optional)
Max Torque approx: 224.0N.m
KV: 16.45/12.91/11.6/9.16(Optional)
Thermic Probe: KTY83-122 (as default, optional)
Max Efficiency approx 88%
Brake type: Disc brake (as default), PCD3*80mm-M8, CB 58mm
Drop-outs: 200mm
Dual Halls with waterproof connectos(One for spare, in case of damage)
16mm² Phase Wire
Waterproof Grade: IP54
Color: Black (As default)
2. Test report:
3. Motor Drawing:
Please noted:
Optional appearance, drawing, performance curve/test report are available.
If you need more technical information, please feel free to contact us.
We will give you reply in 12hours.
MQ QSSVMC72200 Controller
2). DC Current Limit: 200A
3). Max. Phase Current: 450A
4). Protect Phase Current: 550A
5). Battery Voltage: 24V-72V rated, Max. 95V
6). Thermic Probe: KTY83-122
7). Including one controller + USB convertor cable + matched plug
8). Controller size: 283mm*147mm*62mm
9). Net weight: 2.8kg
10). It includes blue-tooth adapter as default
11). Default function: Hall, Throttle, Electric Lock, High Brake Level, Temp sensor, 0-5v e-brake, three speed Button, Hall speedometer, Reverse, Curise.
Please Notes:
1). We have updated the 0-5v e-brake function.
Old: it should be press the brake switch then can achieve 0-5v e-brake funtion.
Update: you can achieve 0-5v e-brake function without press the brake switch.
2). For no lock type controller(higher amps), there is warranty service, but we could offer our suggestions for you.
3). CA function not support anymore. You could customize the controller according to our provided drawing.
4). Pls. make sure all the connection is correct before power on.
B. SVMC Controller List
1). There is no warrant for unlocked type controller and 96100 controller(even though normal type).
2). For SVMC 60A model, only support classic function.
3). Customzied CA function not support anymore from May of 2017, but we will offer the drawing for you to guide how to connect with your CA displayer.
SVMC Normal Size: 247mm*146mm*62mm
SVMCxx060 Size: 215mm*146mm*62mm
SVMC96120 Size: 283mm*147mm*62mm
SSC Size: 186mm*165mm*70mm (Not available so far )
C. SVMC series wiring diagram
1. Svmc series wiring diagram
2. Gerneral Wring For MQCON Controller and CA
D. SVMC controller software interface
E. Additional notes:
1. All RTN pins are internally connected.
2. Meter function is to copy either of hall sensors.
3. Above pin definition is for classical type controller.
Pls. Contact with sales first if you don't know how to connect the controller with motor and other parts.
Application