Sintering machine trolley

Product specification: The volume is below 265㎡

Type:Sintering equipment

Product introduction:
Sinter trolley is the main operating part of sinter machine. Its main function is to form a rotating chain between the sinter head and tail wheels, accept the sinter mixture at the upper horizontal section, and return to the head wheel after being heated, ignited, cooled, and turned over, so as to form a transmission cycle to achieve the purpose of sinter materials.

Product features:
The sintering pallet by the Taiwan car wheel seal article Bi block plate wear plate heat insulation pad, etc with a wheel of car body between the upper and article Bi arched stamped with the four steps of insulation pad, symmetry on both ends fixed sets the bottom of the car two sealing device, machine equipped with four wear plate on both ends of the body, effectively improve the sintering trolley car body under Liang Yi heat deformation and sealing device is not convenient to repair defects with high thermal efficiency reduces wear on a workshop to reduce leakage air volume using large area the advantages of easy maintenance, prolong the service life of the car, reduce maintenance cost.

Product application:
Sintering trolley is a major operation sintering machine parts, main effect is in the sintering of the nose between the tail wheel running rotary chain, at the upper level accept sintering mixture material, lit by the preheat sinter coolingAfter turning, return to the head wheel and form a transmission cycle to achieve the purpose of sintering materials.