Special coating equipment for headlights；

As a functional part, the headlights should have excellent heat resistance, mechanical properties, low fog and good appearance. In the past, car lights had to be treated by spraying paint and evaporating plating. Although spray plating can improve the surface smoothness of the lamp, reduce the precipitation of small molecules inside the material and improve the pass rate of the coating, it will cause high cost and environmental pollution at the same time.

Nowadays, many manufacturers prefer to use the direct spray method. The technology of coating the car lights with protective film is widely used in various types of vehicles.

In view of this market demand, Hongyu auto lamp protective film coating equipment for customers to provide innovative solutions. It meets the market demand. This machine has solved the problem that PC/ABS headlights should be painted for a long time. It can make the injection part of the car lights directly into the vacuum chamber, a complete evaporation coating and SIO protective film coating process, without spraying, so as to avoid the bottom spraying or surface spraying caused by secondary pollution.

Can be processed substrate: lamp injection parts: ABS/PP/PC/ plastic, etc

Coating film layer can reach the international test index:

1. Adhesion test: 100 cell test, adhesive tape, coating does not fall off.

2. Corrosion resistance test: use 1%NAOH drops, 10 minutes later, coating corrosion free.

3. Water immersion test: Soak in 50℃ warm water for 24 hours, the coating does not fall off.