Tapered Reinforced Concrete Electrical Pole Mould

Inside Diameter(mm)	Wheel Distance(mm)	Wheel Diameter (mm)	Length(m)
Ø100	2000	Ø600	6-7
Ø110	2000	Ø600	6-7
Ø120	2000	Ø600	6-8
Ø130	2000	Ø600	6-8
Ø150	2000	Ø600	6-10
Ø170	2000	Ø600	6-12
Ø190	2000	Ø600	7-12
Ø190	2000	Ø650	15-18
Ø230	2000	Ø650	6-9
Ø310	2000	Ø650	6-9
Ø350	2000	Ø680	6-9
Ø390	2000	Ø750	6-9

Prestressed circle spun concrete pole moulds is used for concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.

in order to form concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times.

3. Rigidity increases 1~3 times.

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

5. Good durability, can delay the existence and expansion of cracks.

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.