Theaoson 400ml Aerosol Spray Adhesive Remover super strength

Theaoson 400ml High Precision Aerosol spray Adhesive Remover

Features:

1. adhesive remover is composed of aerosol can, aerosol valve, paint liquid and propellant.
2. With a mild degumming formula, it can effectively dissolve the glue on the surface of the object to be removed, without corroding the surface of the object, and it can be easily removed by spraying and wiping.

Advantages:

1. Easy to remove glue, car and home dual-use, does not hurt objects, environmentally friendly formula
2. Product suitability
3. It is widely used in the removal of self-adhesives such as decoration templates, aluminum-plastic panels, metals, ceramics, glass, automotive paint and transparent adhesives in some rubbers.

Instructions:

1. l Shake well before use, keep the bottle vertical, and spray evenly at 15cm away from the surface to be sprayed;
2. l When removing glue, the cleaning part should be sprayed and covered, and the size and thickness of the residual glue determine the amount of glue removing agent;
3. l After spraying this product, wait for a while, so that the material liquid is fully immersed in the colloid, and then use a cotton scraper or an appropriate tool to achieve the best degumming effect;
4. lThe glue remover has a dissolving effect on the glue. For the paper, plastic film and other barriers on the surface of the glue layer, it should be cleaned up first to prevent the material liquid from contacting the glue to achieve the glue removal effect.
5. l When the remaining small amount of material cannot be sprayed out, please rotate the nozzle 180° before spraying.

Finishing work:

1. lIf the spray is not finished, the remaining material should be stored at room temperature and protected from light, and avoid close to the fire source.

Technical parameter:

1. Parameter Unit At 25°C and 60% relative humidity
2. Appearance of liquid material - colorless transparent liquid
3. Odor - compliant
4. Ejection rate % ≥97
5. Internal pressure, 50ºC MPa ≤1.0
6. Density (20ºC) g/cm3 0.73-0.83

Remarks: All the above data are obtained according to our laboratory tests, and the test results depend on external conditions, usage methods and tools. In order to achieve a better use effect, it is recommended to strictly follow the use method of construction.

Emergency treatments:

1. l When it sticks to the skin, wash it with soap and water. If you feel uncomfortable, please go to the hospital for medical treatment immediately;
2. lIn case of accidental contact with eyes, lift the eyelids, rinse immediately with plenty of water or normal saline and seek medical attention immediately.
3. l In case of accidental ingestion, drink appropriate amount of warm water to induce vomiting. and seek medical attention immediately.

Precautions:

1. lKeep away from children, please construct in a ventilated place, if swallowed accidentally, it should cause vomiting immediately and seek medical attention in time;
2. l When spraying, the aerosol can must be kept upright and the angle with the horizontal plane should not be less than 45°;
3. l Flammables, pressure vessels, do not use near fire sources;
4. lThe weight changes over time, which is a normal phenomenon, and the loss rate is ≤2%/year.