VISSONIC Audio Conference System Flush Mount Gooseneck Microphone Base

VISSONIC Audio Conference System Flush Mount Gooseneck Microphone Base

VIS-GSK-F is a flush mount gooseneck microphone base that can be connected to all range of VISSONIC M series microphones, the microphone can be removed from the base when it’s not in use. The overall base is small and exquisite, with a touch button to switch the microphone on and off. It can be connected to the VIS-AIB analog microphone connection box and used in the CLEACON conference system, or it can connect to an analog system, such as the VIS-FS100-A automatic feedback suppressor, mixer, audio processor etc.

Features

1.Built-in microphone socket, suitable for VIS-M series 6-pin gooseneck microphone

2.It is used for inconspicuous installation on the desktop with compact design.

3.Capacitive touch switch button can be optionally installed to easily set the microphone off or on for sound pickup. The built-in switch can be used for control from remote equipment.

4.Touch button comes with LED status light, operates with phantom power, provides white / red two colors

5.Operation with 24-48V phantom power

6.Output with 3-pin XLR or 3.5 Phoenix connector

7.After inserting the microphone in place, the microphone comes with fasten lock, and the microphone can only be removed after unlock it

8.Built-in RF filter

9.Equipped with rubber isolators to reduce vibration noise on the installation surface

Technical Parameters

Output impedance: 360 Ω

Control

High level when in down position: (DC + 5V);

Low level when in up position: (DC 0V)

LED indicator

High electric level DC + 5V): red /

Low electric level (DC 0V): white

Phantom power

DC: 24-48V,

Power Consumption: 4 mA typical

Switch

Touch control

Weight: 65 g

Dimensions: length 128.2 mm, maximum width 55.3 mm

Accessories

One set of metal fixing ring for standard installation, one pair of shockproof isolators

Open hole dimension

Blueprint

Dimension:

Diameter of the microphone body: 22mm Touch button diameter: 15mm The distance between the main body and the button center: 21.75mm

Product Dimension

System Diagram

Application