VISSONIC Full Digital Audio Wired Conference System Microphone with Physical Button

VISSONIC Full Digital Audio Wired Conference System Microphone with Physical Button

Features

1.The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing

2.Stylish, low profile design with physical button

3.Compliance with IEC 60914, GBT 15381-94

4.Standard CAT5e and RJ45 connectors are used in CLEACON series to provide more convenient on project and maintenance.

5.The cable connection of MIC units are either hiding underneath or from the rear of the unit, makes it convenient for different request of installation

6.Internal high-fidelity loudspeaker

7.Head-set interface in both sides with volume adjust

8.Line-in interface which allows microphone or other line-in device like cell phone, laptop to pass audio through to perform teleconference

9.The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.

10.“Hand-in-Hand-Loop-Network” connection makes the system always working perfectly and more reliable.

Technical Parameters

Electrical parameters

Maximum power consumption: 2.0W

Frequency response: 20Hz ~ 20kHz

Total harmonic distortion (THD) .............. <0.1%

Dynamic range ..............> 94dB

Signal-to-noise ratio (S / N) ..............> 96dB

Headphone load impedance ..............> 16Ω <1kΩ

Headphone output power .............. 25mW

Rated microphone input ..............> 70dB SPL

Maximum microphone input ..............> 100dB SPL

Speaker rated output .........> 70dB SPL at 0.5m

Sensitivity ..............- 46 dBV / Pa

Mechanical parameter

Connection method .............. CAT5 / CAT6 cable + snap

Buttons .............. Stroke button

Main material: ............ Aluminum alloy, ABS

Color: Black

Weight .............. 0.9kg

Dimensions (mm) .............. 140 width × 120 depth × 33 height

System Diagram

Application