WD-460Y BRAND NEW Multi-functional Manual Creasing Machine

Model : 460Y
Function : Crease &perforate
Size : A3
Creasing width : 460 mm
Creasing thickness : 450 g
Creasing Precision : ±0.1 mm
Machine size : 675*590*175 mm
Weight : 9 kg

Ii. Operation instructions

1.The indentation machine on the level of the table, the thickness of the paper to be indentation sandwiched between the two block, adjust the size of the cover in the middle.

2.At the same time, the paper close to the first block, press the handle, in the paper to turn the first block, and then close to the second block to press the handle, it will form a backline and turn the book line.

3.This machine has: single line, double line, dotted line three layering, can be replaced at will.

4.Method of replacing layering: take out the lower layering first from the square hole on the right side of the machine, then take out the upper layering, and then insert the required layering.

5.If the indentation is deep while shallow, the need to adjust the high and low knobs inside the machine, open the cover to see the high and low knobs, adjust the height of the indentation knife.If it is badly worn, it needs to be replaced.