WEP 853D 1A USB 3 in 1 powerful other welding table equipment smd Hot Air Gun SMD hot air solder rework Soldering station
WEP 853D 1A USB 3 in 1 powerful other welding table equipment smd Hot Air Gun SMD hot air solder rework Soldering station
Features:
1.Based on the Company’s revolutionary, innovative design and meeting existing demands of the communication market, this all-in-one machine uses the latest chip technology and integrates a DC power supply, hot air gun, and soldering station!
2.Temperature controls utilize core technology, adopting microprocessor-PID programming for high-speed 100ms real-time
tracking of air gun outlet temperatures and soldering iron tip temperatures, with real-time calibration! Outlet temperatures are extremely stable.
3. With PID high-speed 100ms rapid temperature calibration, conversions are energy-efficient, providing constant temperature power consumption at levels much lower than comparable machines, equating to greater energy savings!
4. The air gun handle wire employs a high-temperature silicone wire (undamaged when 300osoldering tip contacts silicone wire for 30 seconds), stainless steel tubing, and a cutting-edge ceramic framed heating core for extremely stable and reliable performance!
5. Celsius/Fahrenheit Display Temperature Function: To satisfy market demand in different regions, the Company has designed a temperature display mode.
6. The soldering iron features a sleep function that can be set 0-99 minutes.
7.This new type add to 5V output USB interface ,it more convenience repair mobile phone,also can use power supply for mobile.
8.All parts is LED digital display ,and the current is 4 digital precise display current value,the current value can precise display mA value.it is very directly perceived through the senses.
9.The soldering iron has an iron tip cleaner and internal rosin. The rosin aids in the soldering of circuit boards by removing oxide films on the iron tip, reproduces oxidation, reduces iron tip surface tension, and rapidly removes oxides.
10. Pioneering with handle safety protection, an industry-first, a docked handle in the handle holder is required each time prior to machine operation. If not (placed) in the handle holder, the operator will not be able to detect compliance with safety instructions and the machine will not work. The purpose of such a function is to prevent handle misplacement or accidental placement in unsafe or flammable (work) locations that could lead to undesirable consequences.
Parameters
|
parameters |
|||
|
Rated voltage |
AC 220V±10% 50Hz |
||
|
Total power |
≤760W |
||
|
Operating Environment |
0~40℃ relative humidity<80% |
||
|
Storage environment |
-20~80℃ relative humidity<80% |
||
|
Dimension |
255*188*125mm |
||
|
Weight |
4.2KG |
||
|
Performance Parameter |
Hot air rework |
Soldering iron |
|
|
Operating Voltage |
AC 220V±10% 50Hz |
AC 26V±10% 50Hz |
|
|
Output power |
720W |
50W |
|
|
Temperature range |
100℃~480℃ |
200℃~480℃ |
|
|
Air Supply Mode |
Brushless-Motor Fan |
--- |
|
|
Air Flow |
120L/min(MAX) |
--- |
|
|
Temperature Stability |
±2℃ (Static) |
±2℃ (Static) |
|
|
Display Mode |
red LED display |
red LED display |
|
|
Heating Core |
Ceramic Framed Heating Core |
Common Heating Core |
|
|
Standard nozzles/tips |
(10mm,8mm,5mm,13mm) 4 PCS nozzles |
I |
|
|
Tip-to-Ground Impedance |
--- |
<2Ω |
|
|
Tip-to-Ground Voltage |
--- |
<2mV |
|
|
DC power supply |
|||
|
Output voltage |
0~15V |
||
|
Output current |
0-1A |
||
|
Output power |
15W |
||
|
Protection Mode |
Short-circuit over-current |
||
|
Voltage display Mode |
red LED display |
||
|
Current display Mode |
red LED display |
||
|
Load stability |
<0.01±2mv |
||
|
Ripple and Noise |
<1mvrms(virtual value) |
||
What's in the box :
* main unit + gun + power cord
* guide
* soldering iron
* soldering iron holder +gun frame+testleadest cable
* 4 nozzles
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier