DESCRIPTION:
Aluminum single sided self adhesive butyl rubber tape is an exclusive laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of butyl rubber. The butyl compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. A high-quality release liner is applied to protect the adhesive surface until installation.
APPLICATION
Alu-butyl tape may be used anywhere a fast, dependable waterproofing barrier is needed and is ideal for roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. Designed for low-slope roof applications, it is ideal for mobile homes, trailers, RVs, and sun rooms. No glues, torches, tapes or fasteners are required − only a utility knife and a large push or hand roller are needed for installation.
FEATURES
*No melt in hot weather or harden in cold weather
*Anti-UV and aging. Long service life
*Eco-friendly, No toxic or odor.
*High tack and good adhesion.
*For roofing, waterproofing, patching and repair
*Adheres directly to roof deck or substrate
*Aluminum surface reflects heat lowering utility costs
*Easy to install, low cost and labor saving
*Lightweight and easy to handle
*Tough and durable − puncture and abrasion resistant
*Stretches to allow for building movement and conforms to odd shapes
*Requires no coating or covering for exposure to sunlight
PRODUCT DATA
Material Color |
Aluminum layer | Sliver,white,blackish green, brick red |
Butyl Rubber | Black,Grey, off-white |
Roll Width | 5cm,10cm,15cm,20cm |
Roll L eng th | 5m, 10m, 15m,20m,30m |
Thickness | 0.5-1.5mm |
Weight | 1.7KG/m² at 1.0mm |
TECHNICAL SPECIFICATIONS
ITEMS | Test Method | Test Value |
Thickness (mm) | 0.5-1.5MM | - |
Adhesive force （N/25mm） | Based on JIS 0237：2000 180°peel for stainless steel | 50 |
Shear adhesion (N/cm2) | Adhesion test to shear direction | 43 |
Retention force (min) | Hanging test piece with vertical position for adhesion area (10mmx20mm) and hooking a weight of 200g, measured the drop time. | 110 |
Tensile elongation (%) | Based on JIS 0237：2000 | 9 |
