stainless steel patch fittings center lock glass door clip

Glass door clips are generally suitable for 12mm glass. It can be made suitable for 8mm and 10mm thick glass doors by adding paper pads, and some door clips can also hold 15mm thick glass. The Kaida long door clip is suitable for use with 12mm-15mm thick glass doors.
1. The door clamp shell can be divided into three types based on material: stainless steel, aluminum shell, and iron shell. Stainless steel is the best, followed by aluminum alloy, and iron shell is relatively cheap, but it is more prone to rusting.
2. Surface treatment of the shell: mirror finish, sand finish, titanium gold, sand gold, rose gold, etc. Various surface treatments can also be oxidized according to customer needs.
3. Door clamp castings generally use three types of materials: iron, aluminum, and stainless steel. Aluminum and iron parts are most widely used, and aluminum parts have the highest price, best usage effect, and service life. Iron parts are cheap, but due to their hard material and susceptibility to rusting, some manufacturers also use rubber or PVC materials to reduce costs
4. Pad paper can be divided into four types according to material: paper pad, asbestos pad, non asbestos pad, and rubber pad. Lock clamp pads are available in three sizes: 1.0mm, 1.2mm, and 1.5mm, with the rest being 2mm
5. The collets of door clips can be divided into four types based on their purpose: lower collets, upper collets, top collets, and curved collets.
6. The lower clamp can generally be divided into JU (GMT) head, N (New Star) head, D (Duma) head, and B (Square) head. It can be divided into two types according to material: stainless steel and carbon steel.
7. The material of the upper, top, and curved collet factories is generally zinc alloy, but of course, stainless steel or carbon steel with a small amount can also be made.
8. Door clamp screws can be divided into two types based on material: stainless steel and iron. According to their purpose, they can be divided into casting screws, lower chuck screws, and upper (top/curved) chuck screws.