Technical parameters:
The product name | Single-layer glass reaction kettle | ||||
Product model | F-10L | ||||
volume | 10L | ||||
The motor power | 180 w (3:1 reduction power motor) ,220v50HZ 1P | ||||
Motor speed | 0-600 revolutions per minute | ||||
governor | Frequency conversion. Display the infinite speed adjustment | ||||
glass | High borosilicate glass, GG - 17 materials, glass wall thickness 6 -- 7 mm | ||||
Temperature control range | Room temperature - 200 degrees, the temperature control precision (plus or minus 1 degree) | ||||
Port Numbers in the kettle | Seven (mixing, solid loading, thermometer casing, funnel, constant pressure condenser mouth, suction mouth, lower the mouth) | ||||
Stir the configuration | Outside the mixing material of 304 steel lining ptfe material, anchor stirring, leaves a diameter of 220 mm | ||||
Bottom discharge material | New four fluorine lowering compound, without effusion. Fluid phenomena | ||||
Heating power | 3000W | ||||
10Lsingle-layer glass reaction kettle list: | |||||
No. | Spare parts name | Quantity | Note | ||
1 | Single-layer glass reaction kettle | 1 set | Effective volume 10 l (wall thickness: 6-7 mm) | ||
2 | Mixing motor | 1set | Mixing motor 180W,0-600rpm(Stirring shaft universal joint)220v50HZ 1P | ||
3 | Governor | 1set | With digital display, digital display the infinite frequency speed control, speed and temperature with digital display function, frequency conversion wuji speed display, display speed and temperature | ||
4 | Seven kettle | 1pc | Stir, solid feeding mouth, lip, inlet, condenser, thermometer set mouth, feeding mouth | ||
5 | The reaction kettle shelf | 1set | Manufacture plastic spraying, fittings adopt aluminum alloy outer coating, fastener adopts 304 stainless steel fasteners | ||
6 | The condenser | 1pc | Distillation condensation, the double circle distillation serpentine coil, distillation condensation effect is good. | ||
7 | Discharge valve | 1pc | Discharge (can be removed), using thetetrafluoroethy feeding valve, have a good, acid and alkali resistant, high temperature resistant effect. | ||
8 | The thermometer casing | 1pc | Put the thermometer | ||
9 | Constant voltage funnel | 1pc | Vacuum charging, constant pressure titration, add thick materials, the ratio of different solution. | ||
10 | Tetrafluoroethylene mixing rod | 1set | Stainless steel, the diameter of 17 mm, outsourcing mixing ptfe anti-corrosion materials | ||
11 | Tetrafluoroethylene stopper head | 1pc | Used for solid feeding mouth sealed | ||
12 | Body pump material valve | 1pc | Extraction liquid, with the switch |