HW-PCP advanced surface treat system for plate sheet materials corona treatment frame
General Introduction
The purpose of surface treatment of polymer-based materials is to increase surface wettability through electrical discharge. The low surface energy of polymer-based substrates often leads to poor adhesion of inks, glues, and coatings. To obtain optimum adhesion, it is necessary to increase the surface energy of the substrate to just above that of the material to be applied. Corona treatment results in improved surface adhesion properties. The surface of treated material increases the adhesion through the discharge area by the conveyor.
Main features
Sheet corona treater, as a whole system, is easy to install.
HW-PCP is available as a single or double-sided surface treatment system.
It can be installed as a stand-alone unit or with a conveyor system for integration into existing production lines.
The speed and corona frequency can be changed by the button of the control panel to satisfy the different requirements.
Treatment of sheets and flakes for this application may vary from 50 mm to 2000 mm, which gives the customer treatment flexibility for small and large plates.
Technical Specification
|
Item |
HW-PCP |
|
Treatment Size |
50-2000mm |
|
Mains supply |
380V, AC±5 %, |
|
Mains frequency |
50KHz±5 % |
|
Speed |
30-60 m/min |
|
Output frequency |
30 kHz |
|
App. output power |
0-10KW |
|
Corona output |
a. Constant at the same speed b. No influence of supply voltage |
|
Thickness |
0.2-0.5MM |
|
Dynes level |
38-56Dynes/cm |
Ready to ship
Package
Please contact us for more machine technical details and proposal.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier
BF-5 Upgraded new infrared type automatic film width detector for film blowing machine spare parts
Japan Nitto Denko 3M high temperature resistant adhensive tape Teflon tape PTFE film flame retardant No.903UL sealing tape for cutting machine coater
PILLAR SHERMAN ACCU A.Shine Arcotest dyne test pen dyne liqud for testing the corona treatment effectivity surface tension test adhesion test
Rubber silicone sleeve for cover high temperature resistance roller silicon roller tube in corona discharge rack corona rack corona treater
XC2005A XC2005B XC2005D XC2005S double step three sides seal computer high speed sealing and cutting machine paper cutter die cutting
JK8002D hall switch hall sensor approach sensor switch PNP NPN normally open inductive magnetic switch with magnetic iron for PLC bag making machine
BF-2 automatic film width control air feeding control for film blowing machine blown film line
HW-SF half closed type corona treatment station with double pneumatic cylinder and ozone emissions
XC-2001 Position Controller single dual electric motor digital fixed length position control for bag making machine high speed efficient production
HW-2003G 3KW corona treatment processor with IGBT module for PE bag film blowing machine printing machine