power supply:12VDC~36VDC
static current:1.8mA
working current:26 mA
detecting time: detect once every about 5s
detecting smoke method: it works only when it detects smoke twice.
Ony use for two or four wire-power connection alarm system
The product is a new type of photoelectric smoke alarm; by current it can indicate whether smoke occur, When it detects smoke , the current increase, which tell you in advance that fire will occur and avoid unwanted loss, and take you safety and convenience.
Connection-wire diagram
① Terminal 5 connect" +"
② Terminal 2 connect "–"
③ Terminal 6 and 3(4)─relay output terminal.(only tor 4 wires connection)
Installation
1. press the base and turn counterclockwise, take down base;
2. according to the number mark on base and connection-wire diagram, connect wire to number corresponding screw with gasket;
3. fix the base on the selected position;
4. cover the alarm body: make the short line on the base aim at the long line on alarm body and turn clockwise until the long line on base aim at the long line on alarm body.