Description of TSP Diamond
TSP manufactured by micron diamond particles and binder (cobalt or silicon) at the ultra-high pressure and high temperature techniques. In the oil and gas drilling industry, the use of polycrystalline diamond compact (PDC) drill bits and TSP bits has become increasingly common, with PDC drill bits and TSP bits accounting for a significant fraction of the worldwide rock-bit market. TSP for drilling bits of oil field is thermally stable polycrystalline diamond product, which is manufactured by the ultra-high pressure and high temperature techniques. It is thermally stable up to 1200 degree Celsius. Drill bits employing the TSP cutters are capable of reducing overall system costs through increasing rates of penetration and bit life. It can be manufactured into a variety of sizes and shapes (Triangle, cube, cylinder, special etc.).
TSP mining and oil drilling bits are best suited for more abrasive or broken formations. Drill bits and reaming shells made with TSP diamonds are suitable for drilling in soft rocks with hardness below 7 degrees, such as lime rock, marble, shale, etc; and in medium to hard rocks with coarse grains, such as sedimentary rock. The results obtained in drilling medium to hard rocks and non-uniform abrasive formations are much better than those obtained with drill bits impregnated or surface-set with single, natural diamond crystals. We have advanced techniques to test the impact resistance, thermal stability and wear-resistance. to meet different clients special requirement.
More Super Hard cutting tool blanks in the size of 5μm,10μm and 25μm can be used in super-fine processing and fine. They are applicable to the processing of non-metal matal as wood, ceramics,intensified planks and ono-farrous material as copper and aluminum.