FTHS Series high pressure plastic and rubber hose
Thermoplastic high-pressure hose
Ø It is suitable for most low-pressure gasoline or motor cleaning machines, which can be replaced or spliced.
Ø Standard products are M22 long-sleeve rotary cap interface, PE inner pipe, polyester wire woven and thermoplastic PVC jacket.
Ø Scratch resistance, wear resistance, twist resistance and cold resistance.
Steel wire braided high pressure hose
Ø Durable steel wire braided high pressure hose, rubber inner hose and rubber cloth outer sleeve.
Ø The hose of 30MPa is 2-layer steel wire braiding, the hose of 70MPa is 4-layer steel wire braiding, and the pressure resistance is 4 times of the working pressure.
Ø The standard 3 / 8 "quick connect joint below 30MPa is provided with the most commonly used inner hose diameter of 1 / 4", 5 / 16 ", 3 / 8", single layer and double layer steel wire braiding, and the length of 10m, 15m, 20m, 30m can be selected.
Hot water steel wire braided high pressure pipe
Ø High temperature resistant steel wire braided high-pressure pipe, rubber inner pipe, green rubber cloth coat without mark.
Ø The pressure resistance is 4 times of the working pressure.
Ø 3 / 8 "external thread, single-layer and double-layer steel wire braiding, the length of 10m, 15m, 20m, 30m is optional.
Ø The maximum working temperature is 150 ℃.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier
